Home|Contact|News|Sitemap|Deutsch|ImprintSearch

HCC µ-Meter
Precision friction measurement on fibers, yarns and enameled copper wires
 •  friction values of filament guide pieces
•  stick-slip examinations
•  coefficients of friction of fibres
•  uniformity of surface preparation
•  continuous measurement of the friction over the yarn length
•  series of measurements determining the amount of avivage
•  filament/filament measurements
•  dust and wear examinations
•  friction values as a function of the friction body temperature
 Zoom

Description
The HONIGMANN apparatus for the examination of coefficients of friction is the result of continuous and consistent product improvement through conscious feedback from the market.
It represents a flexible system which permits effective use with respect to the particular measurement tasks and offers the basis for easily adaptable extensions.
The apparatus for the examination of coefficients of friction provides you with rapid, exact and reproducible measuring results.
Below you find a schematic presentation of a measuring arrangement typical for determination of friction coefficients.
The test yarn is pulled over a friction body at a certain speed and a certain angle.
The tensile force is measured before and behind this friction body. The friction coefficient is calculated from the eytelwein formula.





Special features
•  modular structure
•  modern 19“-technology
•  standardised measurement conditions
•  conformance to ASTM
•  electronically regulated input tension
•  controlled manually or by the software HCC-F
•  automated measurements with an adequately configurated PC and the software HCC-F
•  tension measurement with RFS-Sensors and amplifiers TS481
•  friction body easy to change
•  many options and expansion units
top 

PreView
... with one click to more information at the InfoGallery
top 


Software

to product page
Software HCC-F
•  special software for the HONIGMANN friction meter
•  aquisition and saving of measuring data
•  analysis functions for measurements
•  data export functions
•  fully software control of the µ - Meter
•  automated series measurement
top 


Options

InfoZoom
Electronically controlled friction body heating
•  to determine the friction as a function of the friction body temperature
•  adjustment range of the friction body temperature 30° to 200°C
•  replaceable friction body holder
•  integrated modularly into the basic unit
•  adjustment range of the angle of contact same as standard device 30 to 3 x 360°
•  digital and software-controlled temperature setpoint


to product page
Take-off device for stick-slip measurements
•  speed range stagelessly adjustable from 0.1-60 mm/min
•  designed with convenient filament clamp fixture
•  modularly integrated into the basic device
•  analog and software-controlled temperature setpoint


InfoZoom
Extended filament/filament measurement
•  for 2 separate, different filaments
•  in combination with the take-off device for stick-slip measurements


InfoZoom
Angle adjustment adapter for filament/filament measurements
•  for setting the angle between the incoming and outgoing thread
•  setting range 30° to 50°
•  for measurements acc. ASTM 3412
•  a requirement for comparability of the values with external measurements


InfoZoom
Preparation nozzle
•  ceramic nozzle
•  incl. nozzle holder
•  mounted on the front panel of the µ - Meter


InfoZoom
Version for sewing yarns
•  pneumatic yarn disc brake
•  specific device modifications for measurements with sewing yarns
•  extended tension range
top 


Recommended periphery

to product page
FAG 800
Thread take-off unit 
•  19"-technologie
•  stackable
•  0 to 800m/min


to product page
Pump PQ 255
•  dosing of preparations
•  controlled servo-drive
•  two fluid outlets
•  0-0,9 up to 6,0ml/min


to product page
Surface Voltage Meter SVM 217E
•  analog signal output
•  integrated into HCC-F
•  meas. range up to ±3kV


InfoZoom
Thermo- / Hygrometer
•  room temperature
•  air humidity
•  analog signal outputs

InfoZoom
Label Writer
•  prints test result
•  use with HCC-Label
 
top 


Accessories

InfoZoom
Additional friction bodies
•  steel friction bodies
•  ceramic friction bodies
•  empty insertion diameters
•  insertion diameter with a roll


InfoZoom
Additional friction bodies for heating
•  steel friction bodies
•  ceramic friction bodies


InfoZoom
Easy running roller V18/12
•  excellent smooth running
•
  low rotation mass
•  very low running noise
•  with aluminium body

InfoZoom
Accessories µ-Meter
•  threading hook
•  different tools
•  spare part rollers
top 


Downloads


Info HCC µ-Meter
PDF-File  |  443k
 
Note:
Viewing of PDF-documents requires Adobe® Reader® - download
top 
forward print

enameled copper wires, enameled copper wire, ultra fine wire, Eytelwein formula, Eithelwein, coefficient of friction, Eitelwein, µMeter, friction measurement on mono-filaments, on wire, friction measuring, friction measurement, frictionmeter, friction meter, µ-Meter, µmeter, mü-meter, mümeter, Mumeter, Mu-Meter, muemeter, mue-meter, HCC, HCC-F, f-meter, Stick-Slip, Stickslip, yarn, monofilament, monofilaments, mono-filament, friction tester, coefficient of friction tester, textile branch, textile industry, textile products, textile test equipment
PRODUCTS
µ-Meter
Special features
 
PreView
InfoGallery
Software
 
Options
 
Recommended periphery
 
Accessories
Downloads
product page
forward print
Latest Product News
20.07.10
New construction of easy running roller V18/12

The well-proven easy running roller has been completely redesigned. [more]
Powerful products...
need special partners



worldwide sales + service

honigmann.com - © 2016 honigmann.com - 17efed228bd9f7273429a32a1b0e9226