| | Tensiomin TM 353 - DynGraph Display of the dynamic parts of the tension signal | |
| | • accurate display of the tension peaks as well as their duration and frequency of occurrence • the DynGraph display is relative to the mean value • directly integrated in the analog instrument • scale: one LED corresponds to 2% of the sensors rated force |
|
Description | |
The measuring amplifier Tensiomin is provided with an analog meter. Because of the mechanical inertia of the meter, the dynamic parts of the tension signal exceeding approx. 2Hz are not displayed with the correct amplitude (see lower exemplary graphic). As this effect is getting stronger at increasing frequency, the loss of important information regarding the parts of tension signal at higher frequencies could be the result.
In many processes, e.g.
- spinning - weaving - texturizing etc. especially the tension peaks and their frequency of occurrence give important information.
The additional display DynGraph - based on LED-technology - works without delay and shows correct amplitudes up to high frequencies. It offers - additional to the mean value of the analog meter - the information on the dynamic.
examplary graphic: sensor 100cN, pulse frequency 150Hz
The Tensiomin TM353 with additional display DynGraph quickly offers precise information about the tension in your process without any complex accessories.
examplary graphic: frequency response of analog meter
|
| |
PreView | |
Related products | |
to product page | | TM 353 • hand-held • for capacitive meas. cells • analog display • switchable meas. ranges |
| | |
|
| | | PRODUCTS |
| | |
|