Tension sensor Tritens® Plus Special version - esp. for measurement in closed force systems
• mech. compensation of material diameter up to max. 16mm • minimal material elongation, high measuring accuracy • wear-resistant, ball-bearing guide rollers • functionality as Tritens 136.3 S30 • available in 11 rated load ranges: 0 to 50N ... 0 to 1kN Standard 0 to 3kN HR - High Range
The Plus-functionality for the first time makes also possible to measure in a closed force system with the sensor Tritens. Closed force systems react very sensitively on a deviation from the ideal straight material course. Here the tension increases disproportionate. Construction-conditioned Tritens Plus works with lowest deviation. The parasitic influence on the tension is negligible.
Furthermore Tritens Plus offers all functions of tension sensor Tritens 136.3 S30.
The alternation between the two modes of operation - Tritens Plus: measurement in closed force systems - Tritens 136.3 S30: measurement on materials in the running process is done very simple in one step.
Special features
• independent of material diameter by compensation with Dia-Compensator • lowest deviation angle minimizes parasitic influences additionally to the tension • high resolution and accuracy • robust - wear-resistant, ball-bearing guide rollers • 2 modes of operation: Tritens Plus and Tritens 136.3 S30
Width of supporting board • available widths: 400mm (standard), 500mm, 600mm • improves measuring accuracy, esp. on flexurally stiff material, high nominal load etc.
print
