Radial force measuring axle RFS® 150 On-line tension measurement up to 3 kN resulting force
• designed as a single-roller system - uses an existing reversing point for tension measurement • robust, for a wide variety of applications and easy to adapt • independent of force introduction point / lever arm • available in 20 rated load ranges: 0 to 1N ... 0 to 5N LR - Low Range 0 to 10N ... 0 to 600N SR - Standard Range 0 to 1kN HR - High Range 0
to 2kN ... 0 to 3kN XR
- eXtended Range
RFS® stands for enduring online precision. The specified and calibrated accuracy remains unchanged throughout the unit’s service life and, across wide ranges, is independent of • the force introduction point, i.e. the sensor is not affected by lever arm action • any axial tilt torques which might appear • direct axial forces The functional principle makes for superb sensitivity while at the same time offering enormous performance capabilities. The force acting radially at the bearing journal, along the measurement vector, causes a microscopically small, elastic deformation of the complex load cell. The deformation is registered at an exactly pre-determined position by way of strain gauges and is then evaluated precise electronically. The high mechanical stiffness of the load cell enables measurement with virtually no excursion. This tension measurement principle is based on the evaluation of the force applied radially and transferred to the sensor by way of the bearing journal. This force is determined by the reversing geometry and the line tension.
Special features
• extremely robust by overload protection up to 800% • existing reversing points can be adapted as measurement points • independent of the force introduction point, i.e. the sensor is not affected by lever arm action • no influence of any axial tilt torques or direct axial forces which might appear • centrifugal force will take no affect with optimal alignment in rotating purposes • stainless steel housing • thought-through concept of housing for simple mounting • also suitable to design measuring rollers for acquisition of very low web tensions
The measuring range of the sensor begins at force’s zero point.
Bearing journals and nominal forces differing from the list are available.
* Special type LR (Low Range)
** Special type HR (High Range) *** Special type XR (eXtended Range)
print
