Radial force measuring axle RFS® 150 E with built-in amplifier
• designed as a single-roller system • integrated measuring amplifier 0-10V or 0/4-20mA • robust, for a wide variety of applications and easy to adapt • independent of the force introduction point / lever arm • available in 19 rated load ranges: 0 to 1N ... 0 to 5N LR - Low Range 0 to 10N ... 0 to 600N SR - Standard Range 0 to 1kN HR - High Range 0 to 2kN XR - eXtended Range
The radial force sensor RFS® 150 E is based on the well-established construction of the sensor RFS® 150 and additionally offers an integrated measuring amplifier. Using the optional current output this sensor is excellently suitable for use in rotating areas (e.g. strander). The current signal is transmitted across slip ring contacts to the non-rotating machine part.
Special features
• integrated measuring amplifier for compact mounting into the application • direct input power supply of 24V DC • voltage output 0 to ±10V or optional current output 0/4 to +20mA • existing reversing points can be adapted as measuring points • overload protection up to 800% • independent of the force introduction point, i.e. the sensor is not affected by lever arm action • no influence of any axial tilt torques or direct axial forces which might appear • suitable for use in rotating areas • centrifugal force will take no affect with optimal alignment in rotating purposes • robust, stainless steel housing • thought-through concept of housing for simple mounting • suitable to design small measuring rollers
The measuring range of the sensor begins at force’s zero point.
Bearing journals and nominal forces differing from the list are available.
* Special type LR (Low Range)
** Special type HR (High Range) *** Special type XR (eXtended Range)
print
