|  | Tension sensor Tritens® 136.3 S6
for handheld and stationary measurement | |
 | | | • one sensor ... three measuring ranges => Tritens®
• three measuring ranges by changing the material guidance
• diameter of material up to 6mm without influence
on the calibration
• treating the material with care
• wear-resistant, ball-bearing guide rollers
• available in 12 rated load ranges:
0 to 50N ... 0 to 500N SR - Standard Range
0 to 1kN ... 0 to 5kN HR - High Range |
|
| Description | |
Reliable tension measurement, even for critical tasks: TRITENS®.
TRITENS® is the decisive innovation for portable and stationary measurement of tensile force – an indispensable aid in monitoring your process parameters.
Its superb engineering features expand the limits of conventional tension measurement and enable dependable and exact measurement even where materials differ in diameter and stiffness and even at high line speeds. And simplicity in use goes without saying – pressing the sensor gently against the product being measured is sufficient.
TRITENS® – in all its versions – covers an as yet unattained spectrum of applications:
• flexurally stiff materials – cable cores, solid wire, tight and loose buffers ...
• large-diameter materials – cable, slotted-core cable ...
• materials with a textured surface – tight and loose buffer cable ...
• or materials running at high speed – ropes ...
• materials such as tire cord, stranding, conductors, belts, ribbon and many, many more.
TRITENS® sensors are thought through down to the very last detail and are manufactured to stringent quality specifications. This makes a decisive contribution to their superior versatility, functionality and longevity.
The easy-running guide rollers with their superb bearings are available in designs specific to the application: V-groove pulleys for various material diameters, rollers with concave or cylindrical running surfaces with a choice of coatings guarantee a solution that’s exactly right for precise and gentle material guidance. |
 |  |
| Special features | |
• no excursion of the material being measured from its guidance
• independent of material diameter
• for mobile and stationary measurements
• rollers for a wide range of purposes
• 3 measuring ranges by changing the material guidance
• splash-proof type optional |
| PreView | |
| Animations | |
| * Example: 3 measuring ranges of a sensor with 200N rated measuring force and 200mm width |
| Options | |
InfoZoom | | Width of supporting board
• available widths: 200mm, 250mm, 300mm, 350mm, 400mm, 500mm
• improves measuring accuracy,
esp. at flexurally stiff material, high nominal load etc.
|
| Special designs | |
InfoZoom | | High Frequency type
• optimized low mass
• high frequent measuring cell |
InfoZoom | | More rollers
Rollers available in different designs
(dimensions, geometry, material, surface etc.)
Please ask for more information. |
| Measuring amplifiers | |
| | 
to product page | | Digitens® 485
• hand-held
• for capacitive meas. cells
• digital display
• auto-zero / hold / peak
|
| 
to product page | | MU 510-19" DigaLog
• for capacitive meas. cells
• 1-channel meas. amplifier
• digital /analog displays
• rugged desktop housing
|
| | 
to product page | | TE 510 N
• for capacitive meas. cells
• 19” slide-in card
• 3 parallel outputs
• 115/230V power supply |
|
| Data Acquisition Software | |
| Accessories | |
to product page | | Floor stand 50
• easy integration
• flexible
• solid construction
|
| | 
InfoZoom | | Carrying case type 136.3
• aluminium design
• max. sensor width: 350mm
|
|
Downloads | Note:
Viewing of PDF-documents requires Adobe® Reader® - download |
|
| | | PRODUCTS |
|  | |
|
print